Parameter Presets
Pre-Configured Mill Setups
Standard SAG Mill
Typical semi-autogenous operation for hard rock. Ore acts as media with supplemental steel balls. Cataracting regime at 75% critical speed.
Primary Ball Mill
Steel-ball-dominated charge at high fill. High impact energy for breaking down SAG mill product.
Secondary Ball Mill
Graduated ball charge for fine particle liberation below 75µm. Higher speed with smaller media for maximum surface area contact.
Primary Rod Mill
Steel rods in cascading regime. Gentle grinding for soft materials. Low impact energy prevents over-fines generation.
Regrind Mill
Fine media in graduated distribution for refractory gold liberation ahead of cyanidation.
Autogenous (AG) Mill
Ore grinds itself - minimal steel balls. Large diameter, low media fill. Requires hard, competent ore that can self-break.
High-Impact Ball Mill
Maximum cataracting near the centrifuging threshold. Large mono balls for aggressive impact breakage of hard clinker.
Slurry-Rich Wet Mill
Heavy slurry operation with high ore fill. Reduced effective impact energy at the toe; watch for pooling behaviour.