Simulation Gallery
Reference Configurations
A collection of mill configurations. Click Load to open any preset in the simulator.
Standard SAG Mill
Typical semi-autogenous operation at 75% critical speed with moderate charge.
75% speed40% charge8m Ø12 liftersCataracting
High-Speed Ball Mill
Aggressive cataracting regime near the centrifuging threshold for fine grinding.
85% speed40% charge4.5m Ø16 liftersCentrifuging
Low-Speed Rod Mill
Gentle cascading motion at reduced speed, ideal for coarse grinding.
55% speed40% charge3.5m Ø8 liftersCascading
Slurry-Rich Operation
High ore fill with slurry enabled - simulating a wet grinding circuit.
70% speed50% charge6m Ø10 liftersCataracting
Maximum Charge
Heavily loaded mill near the safe fill limit - watch the toe angle climb.
65% speed60% charge5m Ø10 liftersCataracting
Fine Grinding Circuit
Optimised for fine particle liberation with graduated ball charge.
80% speed45% charge4m Ø14 liftersCataracting